切换到->中文(简体)

  • General Manager
  • Min Heng:18862190889
  • +86 188 6219 0889,minheng@3rroll.com

  • Sales
  • Howard Zheng
  • Sales Director
  • +86 136 1627 2788
  • howard.Zheng@vip.163.com
  • Min Yanhua
  • +86 139 0809 8608,myhcdzd@163.com

  • Kang Qi
  • kangqi@3rroll.com
  • Current location:Home / Product Center

    Disturbance

    Views:929 Release date:2020/12/1 10:22:16
    Product Details

    According to the technical requirements of high-speed winding and slitting: the deflection value of the middle end of the steel coil core must be ≤0.3mm when the speed is 0-300rpm, and the deflection value must be ≤0.6mm when the speed is 300rpm-700rpm.

    The company has exclusively developed a special "non-contact dynamic deflection testing and processing system", which has been applied in the production of a large number of steel coil cores and has achieved good results.

    Recording surface: 80% of the steel coil core, under the condition of machining and dynamic balance, its dynamic deflection value is 3-5mm, and it must be processed by the system to meet the requirements.

    Previous: Winding



    Copyright © 2018-2024 3R ROLL MANUFACTURING CO.,LTD. All Rights Reserved.
    Address: 59 Weixin Road, Suzhou Industrial Park  Tel:86-512-62752600 Technical Support:SuZhou DaoKe